Basit öğe kaydını göster

dc.contributor.authorGenç, Garip
dc.contributor.authorKörük, Hasan
dc.date.accessioned2018-04-26T13:46:38Z
dc.date.available2018-04-26T13:46:38Z
dc.date.issued2016
dc.identifier.citationGenc, G., & Koruk, H. (2016). On the difficulties in manufacturing of luffa fibers reinforced bio-composites and variations in their dynamic properties. INTER-NOISE and NOISE-CON Congress and Conference Proceedings, Hamburg, Germany. InterNoise, 16. pp. 1561-1565.en_US
dc.identifier.urihttp://pub.dega-akustik.de/IN2016/data/articles/000212.pdf
dc.identifier.urihttp://hdl.handle.net/20.500.11779/200
dc.description.abstractDefects in raw bio materials such as luffa plant effect the characteristics of the composites of these materials. These defects results in structural differences and large scattering mechanical properties such as density, damping and elasticity modulus. There are difficulties during the manufacturing of the composites from bio materials inherent to their nature. The major problems and restrictions encountered with the use of green luffa materials as reinforcement are studied in this study. First, the structural differences in the raw luffa plants are presented and the difficulties in their manufacturing are discussed. After that, the variations in measured modal parameters of luffa composites such as natural frequencies and loss factors and mechanical properties such as density and elasticity modulus are presented. Some solutions are provided to minimize the problems in manufacturing and identifying properties of luffa composites. The results show that the luffa composites can be produced with similar properties without any special selection of fibers to homogenize the batches of fibers for controlling the defects. However, a preliminary selection of fibers is required if the mechanical or dynamic properties of the luffa composites are desired to have small variations.en_US
dc.language.isoengen_US
dc.publisherInstitute of Noise Control Engineeringen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectLuffa bio compositeen_US
dc.subjectComposite manufacturinen_US
dc.subjectDynamic propertiesen_US
dc.titleOn the difficulties in manufacturing of luffa fibers reinforced bio-composites and variations in their dynamic propertiesen_US
dc.typeconferenceObjecten_US
dc.relation.journalThe 45th International Congress and Exposition on Noise Control Engineering (INTER-NOISE 2016)en_US
dc.contributor.departmentMEF Üniversitesi, Mühendislik Fakültesi, Makine Mühendisliği Bölümüen_US
dc.contributor.authorID34856en_US
dc.contributor.authorIDYÖK Araştırmacı ID : 120879en_US
dc.identifier.startpage1561en_US
dc.identifier.endpage1565en_US


Bu öğenin dosyaları:

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster